Skip to content

APC · US model

APC Back-UPS BE600M1: specifications and runtime

We review this exact model’s published ratings, runtime examples, outlet layout and shutdown documentation. Each figure carries a dated source.

Exact model identity: APC Back-UPS BE600M1, US 120 V model. Manufacturer identity source · checked 2026-10-17

Check current Amazon offer

Some links are affiliate links. BatteryRank may earn a commission at no extra cost to you.

APC Back-UPS BE600M1 uninterruptible power supply, manufacturer product photo
Manufacturer product image · checked 2026-10-17

Ratings, outlets and operating facts

Manufacturer-claimed specifications

Rated apparent power

600 VA. Show sourceclaimed sourceshop.se.comchecked 2026-10-17https://shop.se.com/pro/us/en/product/apc-back-ups-600va-120v-1-usb-charging-port-7-nema-outlets-2-surge/

Rated real power

330 W. Show sourceclaimed sourceshop.se.comchecked 2026-10-17https://shop.se.com/pro/us/en/product/apc-back-ups-600va-120v-1-usb-charging-port-7-nema-outlets-2-surge/

Topology

Standby · checked 2026-10-17

On-battery waveform

Stepped approximation to a sinewave · checked 2026-10-17

Transfer specification

6 typical / 10 max ms. Show sourceclaimed sourceshop.se.comchecked 2026-10-17https://shop.se.com/pro/us/en/product/apc-back-ups-600va-120v-1-usb-charging-port-7-nema-outlets-2-surge/

Outlet split

5 battery + surge. Show sourceclaimed sourceshop.se.comchecked 2026-10-17https://shop.se.com/pro/us/en/product/apc-back-ups-600va-120v-1-usb-charging-port-7-nema-outlets-2-surge/
2 surge-only. Show sourceclaimed sourceshop.se.comchecked 2026-10-17https://shop.se.com/pro/us/en/product/apc-back-ups-600va-120v-1-usb-charging-port-7-nema-outlets-2-surge/
7 total. Show sourceclaimed sourceshop.se.comchecked 2026-10-17https://shop.se.com/pro/us/en/product/apc-back-ups-600va-120v-1-usb-charging-port-7-nema-outlets-2-surge/

Model-specific check

This standby model has a lower watt ceiling than the larger line-interactive UPS choices in this pilot. Use its battery-backed outlet group for the equipment that must stay on, and compare the device’s stated power quality needs with the sourced stepped-approximation waveform. Its charging receptacle and PowerChute data connection are separate.

APC product source · checked 2026-10-17APC manual · checked 2026-10-17

Manufacturer runtime examples

Each point is the manufacturer’s stated runtime at its listed output load and test condition. These examples are not extrapolated into estimates for other loads.

APC Back-UPS BE600M1 manufacturer runtime points
Load conditionReported runtimeSource
330 W. Show sourceclaimed sourceshop.se.comchecked 2026-10-17https://shop.se.com/pro/us/en/product/apc-back-ups-600va-120v-1-usb-charging-port-7-nema-outlets-2-surge/
3 min 12 sec. Show sourceclaimed sourceshop.se.comchecked 2026-10-17https://shop.se.com/pro/us/en/product/apc-back-ups-600va-120v-1-usb-charging-port-7-nema-outlets-2-surge/
Manufacturer runtime · checked 2026-10-17At the manufacturer page’s 100% capacity-used setting; page load range 33–330 W.

Use the linked manufacturer chart for loads not listed here. We do not infer runtime from VA, watt-hours, battery Ah or an unlisted load.

Communication and shutdown support

Data connection

Separate USB Type-A smart charging port and USB data port for PowerChute communication; the charging receptacle is not the data connection.

Source checked 2026-10-17

Shutdown limits

The model manual describes a USB data connection and PowerChute Personal Edition for saving open files and shutting down a Windows computer during an outage. It does not establish NAS compatibility.

Source checked 2026-10-17

Confirm your exact operating system or NAS model with both manufacturers. A USB connector alone does not establish software or protocol compatibility.

Read the model in context

The BE600M1 is a standby UPS rated for 330 W and 600 VA, with five battery-backed outlets and two surge-only outlets. The manufacturer specifies a stepped approximation to a sinewave on battery and 6 ms typical / 10 ms maximum transfer. Compare the connected equipment’s actual real-power and apparent-power demand against both ratings, and keep devices needing outage power on the five battery-backed receptacles.

The USB Type-A receptacle provides smart charging; a separate USB data port connects to PowerChute. The manual describes Windows computer monitoring and shutdown. It does not establish compatibility with a NAS or another host operating system.

The listed runtime point is at the manufacturer page’s maximum-load setting. For a router or other low-load device, use the exact model’s source chart at the measured load; this desktop-load point does not support a low-load runtime estimate.

APC product specifications · checked 2026-10-17 BE600M1 manual · checked 2026-10-17