Skip to content

CyberPower · US model

CyberPower CP1000PFCLCD: specifications and runtime

We review this exact model’s published ratings, runtime examples, outlet layout and shutdown documentation. Each figure carries a dated source.

Exact model identity: CyberPower CP1000PFCLCD, US 120 V model. Manufacturer identity source · checked 2026-10-17

Check current Amazon offer

Some links are affiliate links. BatteryRank may earn a commission at no extra cost to you.

CyberPower CP1000PFCLCD tower uninterruptible power supply, manufacturer product photo
Manufacturer product image · checked 2026-10-17

Ratings, outlets and operating facts

Manufacturer-claimed specifications

Rated apparent power

1000 VA. Show sourceclaimed sourcecyberpowersystems.comchecked 2026-10-17https://www.cyberpowersystems.com/product/ups/pfc-sinewave/cp1000pfclcd/

Rated real power

600 W. Show sourceclaimed sourcecyberpowersystems.comchecked 2026-10-17https://www.cyberpowersystems.com/product/ups/pfc-sinewave/cp1000pfclcd/

Topology

Line-interactive · checked 2026-10-17

On-battery waveform

Sine wave on battery · checked 2026-10-17

Transfer specification

4 ms. Show sourceclaimed sourcecyberpowersystems.comchecked 2026-10-17https://www.cyberpowersystems.com/product/ups/pfc-sinewave/cp1000pfclcd/

Outlet split

5 battery + surge. Show sourceclaimed sourcecyberpowersystems.comchecked 2026-10-17https://www.cyberpowersystems.com/product/ups/pfc-sinewave/cp1000pfclcd/
5 surge-only. Show sourceclaimed sourcecyberpowersystems.comchecked 2026-10-17https://www.cyberpowersystems.com/product/ups/pfc-sinewave/cp1000pfclcd/
10 total. Show sourceclaimed sourcecyberpowersystems.comchecked 2026-10-17https://www.cyberpowersystems.com/product/ups/pfc-sinewave/cp1000pfclcd/

Model-specific check

CyberPower publishes full-load and half-load runtime points for this model. Treat them as discrete manufacturer examples; use its runtime chart for another watt load rather than interpolating, and compare the actual connected load with both the VA and W ratings.

CyberPower runtime source · checked 2026-10-17

Manufacturer runtime examples

Each point is the manufacturer’s stated runtime at its listed output load and test condition. These examples are not extrapolated into estimates for other loads.

CyberPower CP1000PFCLCD manufacturer runtime points
Load conditionReported runtimeSource
600 W. Show sourceclaimed sourcecyberpowersystems.comchecked 2026-10-17https://www.cyberpowersystems.com/product/ups/pfc-sinewave/cp1000pfclcd/
2 min. Show sourceclaimed sourcecyberpowersystems.comchecked 2026-10-17https://www.cyberpowersystems.com/product/ups/pfc-sinewave/cp1000pfclcd/
Manufacturer runtime · checked 2026-10-17Manufacturer runtime at full rated load.
300 W. Show sourceclaimed sourcecyberpowersystems.comchecked 2026-10-17https://www.cyberpowersystems.com/product/ups/pfc-sinewave/cp1000pfclcd/
6 min. Show sourceclaimed sourcecyberpowersystems.comchecked 2026-10-17https://www.cyberpowersystems.com/product/ups/pfc-sinewave/cp1000pfclcd/
Manufacturer runtime · checked 2026-10-17Manufacturer runtime at half rated load.

Use the linked manufacturer chart for loads not listed here. We do not infer runtime from VA, watt-hours, battery Ah or an unlisted load.

Communication and shutdown support

Data connection

HID-compliant USB data port; PowerPanel Personal software is available from CyberPower.

Source checked 2026-10-17

Shutdown limits

USB HID connection and PowerPanel Personal software support UPS monitoring and computer shutdown; host OS and NAS implementation must be checked separately.

Source checked 2026-10-17

Confirm your exact operating system or NAS model with both manufacturers. A USB connector alone does not establish software or protocol compatibility.

Read the model in context

This model’s outlet split and power ratings set the boundary for a compact desktop or networking load. Count the equipment’s real-power watts and apparent-power VA separately, then make sure the outlets that need backup are connected to the battery-backed group.

CyberPower publishes full-load and half-load runtime points. They are useful source conditions, not a promise for a particular router, NAS or desktop configuration; for a different load, use the linked OEM runtime source rather than calculating from VA or interpolating the examples.

The product source describes HID USB and PowerPanel Personal as the management path. Verify the supported host software and NAS protocol for your exact operating system before relying on automatic shutdown.