BLUETTI · United States
Exact revision: BLUETTI PV200D (200W foldable. Support-catalog revision, distinct from PV200 and SP200L)
The PV200D is a 200W folding panel with manual-listed 24.6V Voc and 10.8A Isc. Its printed pound and kilogram weights disagree. Check that conflict if carrying weight is part of your buying decision.
An in-stock Amazon listing has not been confirmed for this exact revision. This review is retained for reference.
BatteryRank review
Consider the PV200D if its electrical ratings fit your station and you can confirm the weight of the exact unit. We keep both printed weights visible and exclude the unresolved figure from our weight-based ranking.
An in-stock Amazon listing has not been confirmed for this exact revision. This review is retained for reference.
Specifications below are manufacturer claims. Each reading opens its source attribution and check date.
Review notes
At 24.6V Voc and 10.8A Isc, a single PV200D fits 30V-class inputs that reject higher-voltage 200W panels. The manual’s standing rule is that total panel voltage must stay under the station’s input voltage limit in either wiring mode.
What changes the decision
The user guide prints “17.15 lbs / 8.14 Kg”. But 17.15 lb converts to about 7.78 kg, not 8.14 kg. We quote both figures exactly as printed and use neither silently. Confirm the unit’s actual weight before comparing carry weight.
BLUETTI’s support catalog lists the PV200D with its manual, but the US store sells the SP200L-based 200W panel instead. Availability, pricing and warranty handling for the D revision are therefore support-channel questions, not store-page facts.
The manual’s FAQ states the panel is IP65 water-resistant against splash and warns against leaving it in rain or water. Plan to bring it in when weather turns.
Before connecting
Unfold the four-panel layout, set the kickstands, and face the sun. The manual prohibits use in extreme weather and outside the −10°C to +65°C operating range.
The box art lists the solar panel, an MC4 Cable and the user manual with warranty card. The manual requires total panel voltage under the station’s input voltage limit in series or parallel. And only one PV200D with EB3A/EB55-class inputs per its compatibility note.
BLUETTI’s manual FAQ confirms third-party-station use when the panel voltage suits the station’s voltage limit and the connector matches. Confirm both against the exact station manual.
Read the exact power-station manual before pairing equipment. Our solar panel pairing guide explains the input checks, and the solar recharge deficit tool estimates whether a setup can keep pace with daily use.
Manufacturer documentation
These figures are manufacturer claims. Open a reading for its source and check date.
Exact model questions
No. BLUETTI’s support catalog lists PV200, PV200D and SP200L as separate models with separate manuals, and the SP200L FAQ treats PV200 and SP200L as non-mixable. Match the manual and listing to the exact revision.
Neither silently: the manual prints 17.15 lbs and 8.14 kg side by side, and the two disagree. Use the conflict as a reason to verify the actual unit before treating carry weight as decided.
Only where the station allows it. Two in series total about 49.2V Voc, and the manual requires total voltage under the station’s input limit in either wiring mode. Plus only one PV200D with EB3A/EB55-class inputs. Check the exact station manual.
BLUETTI’s FAQ says yes when the panel voltage suits the station’s voltage limit and the connector matches. Confirm voltage, current, connector and polarity against the station manual.
Evidence record
Each manufacturer source below carries its check date.
https://support.bluettipower.com/en-us/products/pv200d
Checked 2026-10-12
https://s4.bluettipower.com/bluetti_lgf/support/2025/05/05bd918d-7b23-4ca8-9254-6a0525ba095b.pdf
Checked 2026-10-12
Reviewed by the BatteryRank Engineering Team for BatteryRank. Review date: 2026-10-12.
Some links on this page are affiliate links. We may earn a commission if you buy through them, at no extra cost to you.